316L STAINLESS LAB BENCHES FOR CONTROLLED ENVIRONMENTS

Pharmaceutical and biotech lab benches have to be built differently from standard stainless benches. Coved upstands with radiused internal corners instead of square joints — so there's nowhere for contamination to accumulate. No dead-leg welds that trap cleaning fluids. Continuous TIG welds ground flush throughout.

We fabricate to your layout drawings, incorporating sink cut-outs, service penetrations, underbench structure, and adjustable legs as required.

• 316L stainless (304 available)
• Coved upstand with radiused corners
• No dead-leg weld construction
• Electropolish or #4 finish
• Sink & service cut-outs
• Adjustable stainless legs

CUSTOM GOWNING ROOM STATIONS & SEATING

Gowning room stainless steel benching, shoe change seats, garment storage rails, and glove dispensing brackets — all fabricated to your gowning room layout and hygienic construction standards. Single-piece welded construction where possible to minimise joints.

Wall-hung designs to keep floors clear for cleaning. Floor-standing with fully welded legs where wall fixings aren't suitable.

PASS-THROUGHS & UTILITY CHASES TO YOUR LAYOUT

Stainless steel pass-through chambers, utility service chases, and wall penetration collars fabricated to your opening dimensions and hygienic standards. Self-closing doors, gasket seals, and interlocked door systems available where required by your facility design.

• Custom opening dimensions
• Single & double-door pass-throughs
• Interlocked door option
• Gasket-sealed construction
• 316L interior, 304 exterior option
• Integrated shelf & drainage